pH Increaser 1kg

The ideal pool and spa pH levels are between 7.2 - 7.6 promoting bather comfort, optimum chemical effciency and protection of pool & spa plant equipment. Test the pH of your pool or spa water and if it is below 7.2, use pH Increaser to raise it. 

pH Increaser Application Instructions 

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the spa whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution

2. After a minimum of 30 minutes recheck the pH level and if necessary repeat the treatment until the ideal pH is established.

Note: Multiple treatments may be necessary to achieve the desired pH level.

General Precautions

Dosing:

• Wear eye and face protection and ensure granules are not blown back into your face.
• Never mix with other chemicals including household cleaners as a dangerous reaction may occur. 
• When pre-dissolving always add product to water and not vice versa. 

Handling/Storage - Important 

• Handle products in a well-ventilated area - preferably outdoors. 
• Wash hands after use. 
• Ensure chemicals do not become damp in storage - store in a cool, dry place. 

Please read the instructions on the products before use. For more information on chemicals and water treatment, there are documents and downloads available in our Resources section.

For more Product Specific Information Click Here

FAQS

What other names is pH Reducer known by?

pH Increaser is also known as pH Plus, Alkali, Soda Ash or Sodium Carbonate. 

What Happens If I Put Too Much pH Increaser In My Water?