Indux 1

Indux 1

The Indux 1 is a ventilation unit designed for through-the-wall installation, suitable for various environments including swimming pools and changing rooms. It effectively removes stale air while bringing in fresh air from the outside.

Indux 1 Features

• Air Movement: Moves 550m3/h of air
• Speed Control: Fully speed controllable with the facility to reverse the supply air to provide double extraction for periods when heat loss is desirable
• Suitable for Commercial: Solution commercial areas that require a high-performance balanced intake/extract scheme
• Noise Control: Use an autotransformer controller in noise-sensitive areas
• Easy Installation: The unit should be ducted to the atmosphere using an integral wall liner, fit wall thicknesses between 450 and 670mm, and have washable reticulated foam filters provided in the supply and extract airflows.
• Optional flush-fitting box: available to purchase
• Dimentions: 590mm x 370mm

Performance:

The E300 can be fully controlled using a dedicated 3-speed controller. It allows for automatic On/Off control or switching to boost mode. Additionally, a separate humidistat can be used with this equipment, providing further flexibility. The unit offers a choice of heat exchange or high/low-speed extract fan mode and allows for infinitely variable speed control from low to high. It also features integral thermal cut-out and circuit fuse protection.

How Does it Work?

The Indux 1 utilises two developed mix flow fans to supply and extract air. Both air streams pass through plastic heat exchangers, extracting heat from the stale exhaust air and pre-warming the fresh air supply. The extract and supply air streams do not touch, ensuring any contamination.

• Energy Efficient: The heat exchanger consumes no power and provides up to 70% heat recovery.
• High Performance: Special fan designed to develop high pressure at low noise levels.
• Heat Exchanger Technology: All polymer welded construction uses the maximum possible plate area with minimum pressure drop.

Controller Features:

• Provided with knockouts for recessed wring or surface wiring.
• One controller will operate a maximum of 2 HR500 or HR500X units.
• Requires 5-core cable
• Adjustable minimum speed.