2kg Cyanuric Acid (Stabiliser / Conditioner)

2kg Cyanuric Acid (Stabiliser / Conditioner)

Blue Horizons Chlorine Stabiliser Granules should be added to pool water on first fill, or on emptying and refilling, or when substantial fresh water has been added after backwashing or heavy rainfall. 

2kg Cyanuric Acid (Stabiliser / Conditioner) helps to protect unstabilised chlorine (such as a salt chlorinated pool) from being burnt away by UV rays. 

Application Instructions: 

1. Maintain pH level within the ideal range of 7.2 - 7.6 If not in this range, adjust.
2. Test the stabiliser (cynauric acid) level before aiming for the ideal range of 30-60 mg/l (ppm). 
3. Backwash your filter prior to application. 
4. Slowly apply the Chlorine Stabiliser granules via a clean and empty skimmer. Alternatively, add directly into the pool, then brush the Chlorine Stabilser granules towards the main drain. 
5. Repeat dose application if necessary to achieve levels in point 2 above. 

Note: This product is not suitable for splasher / above ground pools. 

Dosing / Storage: 

Handle products in a well-ventilated area, preferably outdoors. Ensure lid is replaced and sealed after use. Ensure chemicals do not become damp in storage - store in a cool, dry place. Wash hands after use.