Relax - 1 Litre Spa Clarifier

Relax Hot Tub Clarifier - 1L  

Relax Spa Water Clarifier - 1L - Reinstates clarity and sparkle to your hot tub water. 

Just an intial dose of 50ml per 1000lts of water and a regular weekly dose of 25ml is enough to keep you enjoying sparkling clear water.

Contains: Poly Diallyldimethyl Ammonium Chloride

Why?

Very fine microscopic particles may not be removed by your filter making the water seem cloudy/dull. Spa clarifier is a formulated to link these particles together allowing them to be removed by your filter restoring the clarity and sparkle to your spa water. 

When? 

Weekly, more often if your spa water looks dull.

How? 

Test your spa water to ensure the correct PH and sanitiser levels are achieved and adjust if necessary. 

1. 1. Remove, hose down and replace your cartridge filter. 
2. 2. Shake bottle before use. 
3. 3. Pour measured dose directly over the surface of your spa water. 
4. 4. Ensure your spa is switched on and leace running for at least 1 hour. 
5. 5. Repeat dose if necessary. 
6. 6. Leave 15 minutes before using your spa. 

How much? 

Spas with excessice total dissolves solids (TDS) will need to be drained, cleaned and refilled. 

1. 1. Test before use.
2. 2. Leave 15 minutes. 
3. 3. Do NOT mix chemicals 

This product is not classified as hazardous but the following general precautions should apply. 

General Precautions: 

Never mix with any other chemicals as dangerous reaction may occur. Handle spa chemicals carefully, in a well-ventilated area preferably outdoors and always wash your hands thoroughly after use. Store chemicals in secure, cool and dry place.