Aquablanc - Active OxygenTest Strips (mps)

Aquablanc Test Strips (mps)

These easy to use 3-way test strips monitor Active Oxygen (MPS), pH and Total Alkalinity levels. If you are using Aquablanc Spa O₂ Tablets, Combi Tablets or O₂ Gentle they provide a fast and convenient method of testing your pool or spa water.

Aquablanc Strips test for: 

• Active Oxygen (MPS) 
• pH 
• Total Alkalinity (TA) 

Instructions for use: 

• Dip test strip into your spa water for 5 seconds, using a gentle flowing motion. 
• Remove from the water, shake off access water, wait for 15 seconds. 
• Using the colour chart on the back of the container, match up the Ph, MPS and TA. Complete this action within 30 seconds. 
• Replace cap back onto container, making sure it's screwed on tightly. 

Water Testing

Once the O2 Gentle Granules have completely dissolved, using Aquablanc (MPS) 3-Way Test strips or an active oxygen pooltester, test your spa water. Aim for an active oxygen (MPS) level of between 5 – 10mg/l (ppm).

pH and Total Alkalinity

The pH level of your spa water is important as it helps to ensure the spa water is comfortable for bathers and the water is neither too acidic or alkali. Aim for a pH reading of between 7.2 – 7.6. Total alkalinity is a measure of the waters ability to resist pH changes. It acts as a ‘buffer’ for the pH. Low Total Alkalinity may lead to large pH ‘swings’ and conversely high total alkalinity may make the pH difficult to adjust. Aim for a total Alkalinity reading of between 80 – 150mg/l (ppm).

The Importance of Circulation & Filtration

It is a combination of circulating water and the cartridge filter collecting debris, along with good chemical treatment that keeps the water safe and crystal clear. Note: when the cartridge filter is dirty, filter efficiency and circulation is impaired, often leading to cloudy and problematic water. Rinse the cartridge filter weekly and for a more thorough clean use AquaSPArkle Immerse or Cartridge Cleaner on a monthly basis.

Spa Fusion - Oxidising your spa water

It is good practice to oxidise your spa water either weekly or fortnightly to aid in the removal of bather contaminants. Whilst a double dose of AquaSPArkle O2 Gentle Granules can be used, the preferred option is to apply a sachet of AquaSPArkle Spa Fusion.