Ecotop - Slatted Pool Cover

Ecotop - Slatted Pool Cover

The Eco Top System

An economical system that permits to limit evaporation and heat losses to a minimum. It s very easy to use EcoTop, you can operate the cover with a key switch. The end positions are programmable.
As an option a photovoltaic solar panel is available. It will charge the batteries thus making the system independent of mains power. No cables to the pool have to be installed.

A 316 grade stainless steel tube, driven by a low voltage electric motor is at the heart of our covers. Profiled, top quality, PVC slats float on the surface of your pool providing excellent heat retnetion properties. The systems contain a computerised system which is programmed to stop at exactly the right place every time - all at the press of a button.

• The top-mounted mechanism is installed on the pool wall. The slats must drop directly on the water, without touching the walls. 
• Few or no adaptions on the pool construction are necessary. 
• Easy to install on existing pools.
• As an option a bench in tropical wood or in PVC and Aluminum is available

The slats can carry more weight, have less seams and, through improved UV resistance, will last longer than the industry standard. Our popular energy saving solar slats will add 4-8 degrees Celcius to your pool depending on the season and geographical location.

Colours

Available in the following colour options:

• Solar
• Transparent (indoors only)
• White
• Grey
• Cream
• Blue

Benefit

The automatic slatted cover will reduce the consumption of chemicals by approximately 50% and heat loss, through evaporation, by the same amount! On indoor swimming pools codensation is also reduced. The AquaTop slatted covers have been independently tested and awarded the French Safety Certificate. A two year guarantee applies to all parts on these units.

There is no need for a seperate motor pit either as the motors for the pit covers and built into the rollers and run underwater.