Honeycomb Black Solar Cell Pool Cover

Honeycomb Black Solar Cell Pool Cover

The bubble cover with the best thermal insulation perfomance on the market. 

Discover the next generation in pool cover technology with the Honeycomb Black Solar Cell Pool Cover, powered by the brilliant patented alveolar structure. Built for performance, durability, and environmental responsibility, this advanced premium cover is a smart upgrade for pool owners wanting more from a solar cover. 

What sets it apart from the rest? A unique dual-layer design. The black outer coating acts as a UV shield, blocking the sun light that algae feeds on, helping you to naturally limit growth and reduce chemical use. Beneath, the translucent honeycomb shaped bubbles allow solar energy to pass through and efficiently heat your pool water. 

By combining heat retention, solar gain, and algae prevention in one intelligently designed cover, this is not just another pool cover, it's the most effective and versatile on the UK pool market. 

550 microns bubble covers with “Alveolar technology” are warrantied for 6 summer seasons with a degressive rate of 20%

Key Benefits of the Honeycomb Black Solar Cell Pool Cover

Advanced Dual-Layer Design: 

• The cover combines a black UV blocking layer with a transparent honeycomb bubble, offering the best of both worlds. The dark outer layer blocks the light algae need to grow, helping reduce chemical use. Meanwhile, the inner translucent layer lets solar energy penetrate and warm your pool water effectively. This greenhouse effect significantly improves heating efficiency, outperforming standard solar bubble covers available on the market. 

Exceptional Heat Retention & Energy Saving:

• Thanks to it's 550 micron polyethylene construction, the Honeycomb cover offers +7% insulation performance compared to GeoBubbles 500 micron covers. It achieves up to 39% reduction in thermal bridges, drastically reducing heat lose, keeping your pool warmer for longer. 

Unmatched Water Conservation: 

• The cover blocks over 99% of water evaporation. For a standard 8m x 4m swimming pool, that's saving approximately 180 litres of water per day during typical summer use. This means less topping up, reduced energy loss through evaporation, and a more sustainable pool experience. 

Durability You Can Rely On:

• Manufactured with a 550 micron polyethylene film, this cover resists daily wear, UV degradation, and chemical exposure. It's design reduces material thinning and enhances it's long term performance, outlasting standard 400 micron covers with ease. 

Eco-Conscious and Easy to Use

• Reduces chemical use and filtration time. 
• Requires less water to top-up. 
• Free solar heating = lower energy bills. 
• Compatible with manual or motorised reels. 
• Must be used with an opaque protective tarpaulin when stored on a reel
• Bubble side must face the water

Important Storage Information

These covers must be protected with a protective tarpaulin when they are not on the pool. These covers must be placed away from frost in winter.

The wearing of coping or the area around the pool is not covered by the warranty. Dimensional stability: 1%.

Do not leave the bubble cover on during shock treatment (48 hours).

Rinse the cover using clean water 2 to 3 times per season. Before taking it in for winter, rinse thoroughly and leave to dry.

• Summer cover water treatment: in compliance with applicable legislation (French decree n° 81324 of 7.4.81), swimming pool water treated with chlorine must comply with the following values: pH between 6.9 et 7.7 active free chlorine between 0.4 and 1.4 mg/l - combined chlorine max 0.6 mg/l - TH and TAC between 10 and 30°f.
• Foam cover water treatment: in compliance with applicable legislation (French decree n° 81324 of 7.4.81), swimming pool water treated with chlorine must comply with the following values: pH between 6.9 et 7.7 active free chlorine between 0.4 and 1.4 mg/l - combined chlorine max 0.6 mg/l - TH and TAC between 10 and 30°f.