TA Plus (Total Alkalinity)
SKU
CHEM-TA+
TA Plus / Increaser in granule form is used to raise the TA (Total Alkalinity) level of water.
TA Plus / Increaser in granule form is used to raise the TA (Total Alkalinity) level of water.
TA Plus Information
TA Plus is used to increase the alkalinity of pool water. Ideal pool water conditions exist with a total alkalinity between 80–140 ppm.
Use 81g per 4,545 litres (1,000 gallons) of water to increase total alkalinity by 10 ppm. Please read instructions on the products before use. For more information on chemicals and water treatment, there are documents and downloads available in our Resources section.
Key Features
- A fine, rapid dissolving powder
- Part of the B.O.A.S.T. System
Ideal TA Range: 80–150 mg/l (ppm)
Total alkalinity is a measure of the water's ability to resist pH change.
Application Instructions
1. Pre-dissolve the product in a clean plastic container at a maximum rate of
100g of product per 2.2 gallons (10ltrs) of clean warm water. Stir well to
ensure the product is fully dissolved. Carefully add the resulting solution to
the pool whilst the pump(s) are turned “on”, preferably near to the water
inlets to aid distribution.
2. The total amount of TA Raiser can be applied in one application unless
metals are present in the pool water.
| Restricted Product | Yes |
|---|
Write Your Own Review
